Wrought iron beds: styles, sizes, finishes and how to choose one
A wrought iron bed is not just a classic bed: it can be romantic, country, English, linear or industrial. Here you will find the styles, the real sizes of the models we read in the data sheets, the finishes to choose from and how to clean it without damaging it.
A wrought iron bed has a headboard, footboard and side rails in iron worked while hot: to choose one, overall size matters more than the size of the base, because in the six models from our catalogue compared in the table the frame is 7 to 26 cm wider and 6 to 19 cm longer than the base. The rest comes down to style, finish and the quality of the paint.
In short
- Wrought iron is shaped while hot: styles, decoration and finishes vary a lot from model to model.
- The size of the slatted base (for example 160 x 200 cm) is not the overall size: read the model’s data sheet and leave at least 60 cm free around the bed.
- Typical finishes: antique iron, anthracite, black and cream; the catalogue also lists gold, silver and copper leaf.
- According to the Italian site arredamento.it, poor painting leads to rust or fading; upkeep is minimal if you dust regularly.
- The limit to consider: few models come with storage and, for the Cantori beds we read, the storage box is ordered on request and delivery is estimated at 9 to 11 working weeks.

What is a wrought iron bed and how is it made?
According to the Italian site cosedicasa.com, wrought iron takes its name from the hammer used on the anvil and is the result of a process that forges the metal while hot, when it is glowing. Immobiliare.it describes it as a low-carbon steel, and therefore very ductile, used for beds, railings and antiques. Arredamento.it points out the paradox of the material: strong, solid and heavy, yet able to give a sense of lightness.
Again according to arredamento.it, solid iron is typical of craft work, while industrial production often uses hollow tubes, which are lighter; craft decorations are never identical, industrial ones are. In the data sheets of the Cantori beds in our catalogue the frame is laser cut, smoothed and decorated by hand; in the Raphael the bolting is done hot.

The parts to look at are the same in every model: headboard and footboard (where the design makes the difference), side rails, slatted base and feet. Arredamento.it warns that among the most common surprises is a failing weld, so it is best to choose serious manufacturers and not to skimp. The J’Adore data sheet, for example, mentions flush welds and surfaces smoothed by hand.

Which styles of wrought iron bed are there?
Classic and romantic. This is the best known image: scrolls and loops on the headboard. In the catalogue it covers the Pascià, the Ghirigori and the J’Adore, which the data sheet suggests for a young, romantic bedroom. Arredamento.it recalls that wrought iron is typical of country, shabby chic, Provençal and colonial styles, but also fits modern furnishing because it easily takes many shapes. To set yours in context, also read how to furnish in shabby chic style.

Country. The Raphael is described in its data sheet as a country style bed in wrought iron, suited to a loft or to the middle of the room, with or without a canopy. For the context, see country style furnishing.


English. The Inglese is inspired by English beds, with a headboard and footboard of vertical bars; the data sheet gives an iron frame and metal finishes such as polished brass, aged brass, nickel and copper.


Modern and linear. Agave, Bamboo and Contour are wrought iron beds with a modern design, hand lacquered; the data sheet suggests the Agave for eclectic spaces, studies turned into guest rooms, modern dining kitchens or seaside homes. Arredamento.it also speaks of minimalist models, with clean lines and lighter in weight.

Industrial. The Urbino is a cold-tapered metal bed, bolted together with screws, with trapezoidal side rails and spheres and feet turned from solid: the data sheet calls it industrial in design. It is not given as wrought iron, so we mention it as a metal alternative.

To compare other double bed styles you can also read the 6 trending styles for the bedroom.
What size is a wrought iron bed?
The standard sizes given by arredamento.it are 80 x 190 cm for a single bed, 120 cm wide and 190 or 200 cm long for a three-quarter bed and 160 cm wide for a double; Diotti gives 160 x 190 or 160 x 200 cm for a double and 140 cm wide for a French double. But these are sizes of the base and mattress: the overall size of the frame is another matter, and it changes from model to model.
| Model | Type | Base and mattress (cm) | Overall W x D (cm) | Where we read it |
|---|---|---|---|---|
| Raphael (Cantori) | wrought iron, country style | 160 x 200 | 167 x 214 | catalogue data sheet |
| Agave (Cantori) | wrought iron, modern | 180 x 200 | 187 x 212 | catalogue data sheet |
| Bamboo (Cantori) | wrought iron, modern | 180 x 200 | 187 x 206 | catalogue data sheet |
| Contour (Cantori) | wrought iron, modern | 160 x 200 | 186 x 219 | catalogue data sheet |
| Ghirigori (Cantori) | metal, classic | 160 x 200 | 182 x 212 | catalogue data sheet |
| J’Adore (Cantori) | flat metal bar, classic | 160 x 200 | 185 x 212 | catalogue data sheet |
| Giulia (Cosatto) | iron, single bed | 85 x 190 | 92 x 202 | arredamento.it |
| Syracuse (Maisons du Monde) | iron | 160 x 200 (recommended) | 162 x 203 | arredamento.it |

On the six Cantori beds in the table the overall width exceeds that of the base by 7 to 26 cm and the length by 6 to 19 cm: these differences are our own calculation from the data sheets. In the two examples from arredamento.it the difference in width is 7 cm (Giulia) and 2 cm (Syracuse). A practical example: the Contour for a 160 x 200 cm base measures 186 x 219 cm; with the 60 cm free on each side that arredamento.it recommends as a minimum, you need 306 cm of width (186 + 60 + 60), our own calculation.
The same site recommends 60 to 70 cm free all around a double bed and a headboard no lower than 90 cm. For bed sizes, see also how big a double bed is, the sizes of the French double bed and the sizes of the single bed. The data sheets give several heights (headboard, footboard, bed base) in different formats: read them on the model’s sheet before choosing.
Which finishes and colours can you choose?
For Raphael, Pascià, Ghirigori and J’Adore the data sheets list first category finishes such as antique iron, anthracite iron, metallic iron, sepia black and matt cream lacquer; second category options include gold leaf, silver leaf, copper leaf, glossy black lacquer, glossy cream lacquer and brushed mother-of-pearl. The Inglese has metal finishes such as polished brass, aged brass, brushed brass, black nickel, polished nickel, pale gold and copper.

Arredamento.it gives black as the typical colour, which gives a heavier character, and cites white, grey and ivory among the most requested, as well as anthracite, blue, red, gold and silver. On quality it explains that the painting cycle starts with an anti-rust treatment, followed by polyurethane enamels and water-based enamels: if the paints are not of good quality or the painting is not done properly, the bed tends to rust or lose colour.
How to match the headboard, bedside tables and walls?
Arredamento.it observes that metal or wooden headboards collect less dust than upholstered ones. For headboards in other materials and heights you can read the guide to bed headboards.
For bedside tables, the Cantori Ghirigori and J’Adore measure 59 x 38 x 52 cm according to the data sheets: wooden structure, with decorated iron feet and frame; the Ghirigori has two drawers with full extension runners. More ideas in 20 designer bedside tables and, for the right height, in how to choose the height of a bedside table.


For the walls, arredamento.it notes that wrought iron goes well with a wooden parquet floor for a warm atmosphere. In the photos in this article the iron appears against white, taupe and dark walls; ideas for colours are in how to paint the walls of a bedroom.
How to choose a wrought iron bed: a checklist
- Start from the base and mattress, then read the overall size in the data sheet and add at least 60 cm free around the bed.
- Choose the style to suit the room: scrolled designs are more decorative, linear ones more discreet.
- Ask how the iron is made (solid or tubular) and how welds and painting are done.
- Check the finish on the sample card: matt black and gold leaf change the character of the room.
- If you need storage, check whether the box is available: for the Cantori Raphael, Ghirigori and Pascià it is ordered on request for the 160 and 180 x 200 cm sizes; where space needs freeing up you can also look at the wall bed.
- Consider lead times: for the Cantori in the data sheets, production and delivery are estimated at 9 to 11 working weeks from payment.
How to clean and look after a wrought iron bed?
Arredamento.it indicates minimal upkeep: dusting regularly is enough. For a deeper clean, Immobiliare.it recommends these steps.
- Remove dust with a dry cloth or a feather duster, especially on decorations and details.
- Wash with a soft cloth or sponge, well wrung out, using lukewarm water and neutral soap, without scratching.
- Wipe with a damp cloth to remove soap residue.
- Dry immediately and completely with a soft cloth, because moisture encourages rust.
- If rust spots appear, rub them with fine grit sandpaper, gently, and apply an anti-rust product.
- To protect and add shine, buff with a soft cloth and, if you wish, spread a thin layer of furniture wax.
The same source suggests a thorough clean at least twice a year and more frequent checks in winter, when humidity is higher.
Which mistakes to avoid?
- Choosing from the size of the base alone and finding out later that the overall size does not fit.
- Skimping on quality: welds and paint are where the most common problems start.
- Forgetting the space around the bed: with less than 60 cm it is hard to make the bed and open other furniture.
- Not drying after cleaning: moisture brings rust.
- Expecting storage everywhere: in single beds, writes arredamento.it, storage compartments are often missing.
- Mixing up metals: the Urbino, for example, is metal and not given as wrought iron.
Frequently asked questions
Does a wrought iron bed suit a modern bedroom?
Yes, if you choose a linear design: arredamento.it speaks of minimalist models with clean lines, and in the catalogue Agave, Bamboo and Contour have a modern design. Scrolled models work better in classic or romantic rooms.
How much space does a wrought iron bed take up?
It depends on the model: in the table the width runs from 162 to 187 cm for the doubles and the length from 203 to 219 cm. Add at least 60 cm free around the bed.
How do you clean a wrought iron bed?
With a dry cloth for dust, then lukewarm water and neutral soap and immediate drying. For rust, fine sandpaper and an anti-rust product, as Immobiliare.it advises.
Before you choose, measure the room, mark 60 cm free around the bed and compare the overall sizes in the data sheets: from those three facts comes a wrought iron bed that suits your bedroom.









